About MATERIAL KEEPERS
Orange Finger Cots
Descriptions:
Orange Finger Cots are made from 100% natural latex.
Cleanroom compatible.
Orange Finger Cots Features:
Durable and reusable, a cost effective finger cots
Rough surface provides a firm grip that is slip resistant.
Orange color for easy recognition.
Orange Finger Cots physical properties:
Tensile strength : Min 25 Mpa
Elongation : Min 700%
Nitrile Finger Cots
Descriptions:
Nitrile Finger Cots are constructed from 100% clean synthetic nitrile polymer。
Nitrile Finger Cots take the worry away for those with latex allergy issues while offering protection against skin and oil contamination.
Since nitrile are resistant to many chemicals, it will not dissolve under chemical contacts.
The inherently anti-static nature of nitrile also offers natural static control without carbon shedding.
For EPAs where cleanliness is a concern, white does not expose as much handling soils.
For companies using both non-ESD and ESD nitrila finger cots, offers white and blue nitrile finger cots to differentiate finger cots with static protections.
Features:
Powder -free/ISO5 /Class100 cleanroom
Suggested for ClassII static sensitivity devices (thresh-old up to 3999v）
Compliant with ASTM and IEST-RP-CC005-3 standard
Immobilized packaged in anti-static,gas-impermeable film flushed with semiconductor grade N2.
Resistance per ANSI/ESD SP 15.1:10e9 ohms
Nitrile Finger Cots application:
EPAs and other ESD-sensitive area
Defense, avionics
IC industry, Marine and consumer electronics
Assembly areas, wire bonding, and laser diodes
Repair stations, field repair kits
Cleanroom Finger Cots
Cleanroom Finger Cots are excellent for small parts handling, preventing contamination caused by direct contact of fingers to product, and protecting blisters, abrasions and cuts on fingers from contamination and infection when in contact with patients, medications, or chemicals.
- Pre-washed to minimize particulates, making these suitable for controlled environments
- Excellent tactility
- Multiple sizes available for the best fit and reduced fatigue
- Uniform thickness for equal sensitivity and protection
- Powder-Free
- Compliant with ASTM and IEST-RP-CC 005.3 standards.
- Cleanroom Finger Cots Features:
- Material : Natural latex
- Color: Natural
- Cleanroom finger cots: class rating:class100~10000
- Powded: Powder-free
Conductive Finger Cots
Descriptions:
Conductive Finger Cots are made from 100% pure natural latex.
Inherently static dissipative quality will not rub off, wash off, or weaken with age.
Very rapid static decay, 5000 V to 0 V in 0.01 seconds, prevents buildup of possibly destructive static energy.
Features:
Inherently static dissipative quality will not rub off, wash off, or weaken with age
Extremely rapid static decay will not permit the buildup of destructive static energy
Dark color simplifies the process of monitoring critical EDSD production areas
Compliant with USDA and FDA regulations, 21 CFR, for use in food processing
Capable of dissipating 5000 V to 0 V in 0.01 seconds
Average surface resistivity is 2 x 106 ohms/sq.
Nitrile ESD Finger Cots
Nitrile ESD Finger Cots are made from ESD nitrile.
Nitrile ESD Finger Cots take the worry away for those with latex allergy issues while offering protection against skin and oil contamination.
Since nitrile is resistant to many chemicals, it will not dissolve under chemical contact.
The inherently anti-static nature of nitrile also gives natural static control without carbon shedding.
As a homogeneous material, nitrile esd finger cots offer resistance through the material and not just on the surface.
For EPAs where cleanliness is a concern, blue does not expose as much handling soils.
For companies using both non-ESD and ESD finger cots, Smartet offers white finger cots to differentiate ESD protection.
Features:
Powder-free / ISO 5 / Class 100 Cleanroom
Suggested for Class II static sensitivity devices
Compliant with ASTM and IEST-RP-CC 005.3 standards
Immobilized packaged in anti-static, gas-impermeable film flushed with semiconductor grade N2
Offers homogeneous resistance
109 ohms resistance as per ANSI-ESD SP15.1
3 mil thickness
Anti Static Finger Cot
These 100% pure natural latex anti static finger cot are ISO 5 Cleanroom compatible.
Their average surface resistivity is 109~10 Ohms/sq. and the average decay charge rate is<2 seconds. Packaged in anti-static bags for more protection from static charges, the cots are available in three different sizes and sold in packs of 500g
Note: these are non sterile as standard but can be sterilised by gamma irradiation on request. Please call or message for more details and a quote.
Anti Static Finger Cot Features:
100% pure natural latex, pink, color
Thickness: 5 Mils
Length: 2.55″ – 2.95″
Elongation: 761%
Tensile strength: 4.514 lbs/inch2
Packed in sets available to as packs of 500g
Available in four different sizes – S, M, L
Can be sterilised by gamma irradiation on request. Please contact us for more details and a quote